




12 V | about 0.6 kW | 16 teeth (composite / resin gear) | counter-clockwise (CCW)
Overall length: approximately 184 mm (7-1/4 in); field case length 108.3-111 mm (4.265-4 3/8 in)
Mounting holes: two-hole flange, two 8 mm plain holes, centre distance approx. 96 mm (3-25/32 in), bolted directly to the cylinder body
Pinion: 16 teeth, composite / resin drive gear, outer diameter 40.6 mm (1.598 in) - designed for aluminium or plastic flywheel ring gears
Electrical connection: B+ (M6) main power stud, housing as earth ground; PMDD permanent-magnet direct drive with Bendix inertia engagement. Some aftermarket batches ship without the solenoid - the shipped configuration must match the listing description.
Compatible Engines: Briggs & Stratton single-cylinder air-cooled horizontal-shaft 10-13 HP engines - 243431 / 243432 / 243434 / 243436 / 243437 / 243451 / 243452 / 243457 (approx. 392cc), 302431 / 302432 / 302434 / 302437 (approx. 494cc), 326431 / 326432 / 326434 / 326435 / 326436 / 326437 (approx. 531cc)
Compatible Models:
Toro: Groundsmaster 52 fairway mower (1979-1986), 30545 / 30560 52-inch walk-behind mowers, 30760 / 30775 rear-engine riding mowers
12V replacement starter motor reference for Briggs & Stratton horizontal-shaft single-cylinder air-cooled engines. Briggs & Stratton identifies 391178 as a starter motor and lists 394807 and 396306 as related numbers; aftermarket catalogs cross-reference it to Lester 5745, Arrowhead SBS0003 and WAI 5745N for Toro Groundsmaster and walk-behind / rear-engine rider mowers.
Catalog-listed equipment: Briggs & Stratton 243 / 302 / 326 series horizontal-shaft engines and the Toro Groundsmaster and walk-behind / rider models listed above. Confirm the OE number, engine model and type number, existing starter number, voltage, pinion tooth count (16), pinion outer diameter (40.6 mm), rotation, mounting hole pattern (two 8 mm plain holes, approx. 96 mm spacing), field case length (108.3-111 mm), overall length (approx. 184 mm), terminal layout and physical dimensions before purchase. Exact 391178 length, width and height have not been verified and are omitted.
Critical identification: distinguish this unit from Briggs & Stratton 715208 (15 teeth, Vanguard single) and 693554 (16 teeth, Vanguard V-twin) - this is the 16-tooth unit with a 108-111 mm long field case and 96 mm hole spacing, made for the older 243 / 302 / 326 horizontal-shaft singles and Toro Groundsmaster equipment. It uses a composite / resin drive gear designed for aluminium or plastic flywheel ring gears to avoid gear damage; never substitute a steel 16-tooth gear, which is the most common selection error on this platform. The three selection checks are: 16 teeth + 4 3/8 in field case + 3 25/32 in hole spacing. State clearly whether the solenoid is included in the shipped configuration to avoid disputes.
This listing is organized for turf equipment procurement teams, repair shops and parts distributors searching by equipment model and OEM reference, particularly for legacy Groundsmaster and walk-behind fleets. Standard supply terms listed for this reference: MOQ 50 pieces, lead time 15-30 days, 12-month warranty, ISO 9001 / IATF 16949 / CE certification. These are indicative values. For a quotation, specify the engine model, old-part number, required quantity and destination. Confirm price, stock, package quantity, warranty, certification documents and delivery terms with the seller before placing a purchase order.
The 243 / 302 / 326 horizontal-shaft Briggs engines are fifty-year-old iron that refuses to retire - they still drive Toro Groundsmaster 52 fairway mowers on club turf, 52-inch walk-behinds, and rear-engine riders in collections and working sheds alike. Their weak point is the original starter, and replacements stopped flowing from the factory long ago. This unit answers with the correct 16-tooth composite gear, the long 108-111 mm field case and the wide 96 mm hole spacing that identify the platform. For a distributor, it is a scarce-parts item with an owner base that repairs rather than replaces - exactly the market where steady stock wins the order over the NOS dealer.
A permanent-magnet direct-drive motor with the old Bendix charm: the key sends current to the M6 stud, the copper armature spins up between permanent magnets, and inertia throws the 16-tooth composite gear along its sleeve into the ring gear. The engine catches, the gear retracts, and the starter steps out of the picture. The composite gear is not a cost cut - it is the design. These engines carry aluminium or plastic ring gears, and a steel pinion would shred one inside a season; the resin gear sacrifices itself gently instead. Rotation is counter-clockwise at the pinion end, matching the horizontal-shaft flywheel. The 96 mm hole spacing sets the mesh depth the factory intended, which is why the measurement matters more here than on newer platforms.
Groundsmaster 52s and their cousins arrive with a handful of familiar faults. The crank slows to a crawl - weak magnets or worn brushes in a starter that has cranked since the Carter administration. A whirring spin with no engine movement - a stripped composite gear doing its job by sacrificing itself, or a Bendix that stopped throwing. Grinding on engagement - a gear no longer reaching full mesh on a worn ring gear. Intermittent starts after damp storage - arced commutator surfaces. One replacement unit ends all of them. The checks before ordering are the three that define the platform: 16 teeth, 4 3/8 in field case, 3-25/32 in hole spacing. And do not let anyone talk you into a steel 16-tooth substitute - it is the single most common way to ruin a good aluminium flywheel.
For shops serving legacy turf fleets, a stocked 391178 turns a grounded Groundsmaster into a same-day repair with the original bolts and cable. For distributors, this is a scarcity play done honestly: MOQ 50, 7-30 day lead time, 12-month warranty, ISO 9001 / IATF 16949 / CE practice, and pricing that undercuts both OEM and NOS channels by a wide margin. The buyer base repairs instead of replaces, demand is steady rather than seasonal, and seventeen catalog cross-references route the search here from any starting number.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Briggs & Stratton | Briggs & Stratton 243400 (single-cylinder horizontal 10 HP) | 243400 | 1970–1990 |
| Briggs & Stratton | Briggs & Stratton 300400 (single-cylinder horizontal 12 HP) | 300400 | 1970–1990 |
| Briggs & Stratton | Briggs & Stratton 326400 (single-cylinder horizontal 16 HP) | 326400 | 1976–1990 |