




12 V | 24-tooth steel pinion | counter-clockwise (CCW)
Pinion: 24 teeth, outer diameter 57.7 mm (J&N catalog value; a few catalogs list 40.6 mm - measure the old unit)
Mounting holes: multi-hole flange, 8.7 mm plain holes (unthreaded), ear-to-ear spacing 97.3 mm (3.831 in)
Overall length: approximately 170 mm (6.693 in)
Electrical connection: single B+ main power stud, housing as earth ground; PMDD permanent-magnet direct drive; net weight approx. 2.3-2.4 kg
Compatible Engines: Briggs & Stratton Intek V-twin OHV 18-26 HP (28B702/28B707, 28M707, 28N707, 28P777/28Q777, 351442/351447, 40G777/40H777, 44P777/44M777, 656-724cc)
Compatible Models: John Deere L118 / L120 / L130 (2003-2005), D150 / D160 / D170; zero-turn mowers and generators on the same engines
Replaces: 491308 / 497453 / 690658, John Deere LG497453 / LG497543
12V permanent-magnet starter designed specifically for the Briggs & Stratton Intek V-twin 18-26 HP platform and the John Deere L-series tractors built on it. High-grade magnet material and a precision armature keep starting current low and cold-weather cranking quick, making it a dependable replacement for a tractor that has become hard to start.
This is the core aftermarket SKU for the single largest riding-mower engine population in North America: the B&S Intek V-twin 656-724cc platform, fitted to John Deere L118/L120/L130, D150/D160/D170 and hundreds of thousands of MTD, Craftsman and Husqvarna tractors. For distributors it is a volume line; for repair shops it is the part that shows up on the bench every week during spring no-start season.
V-twin of 655cc or more needs sustained cranking torque to build compression on both cylinders, and that is exactly what the gear-reduction-free PMDD layout delivers here: permanent-magnet field, copper armature, and 24-tooth steel pinion with a wide contact band on the ring gear. The pinion engages through a solenoid-shifted drive - the solenoid pushes the gear into mesh before the motor spins, so engagement is positive rather than inertia-driven, and there is no grind even when the ring gear is worn at the usual spots.
Windings are pure copper; the armature is dynamically balanced so 170 mm body does not growl at high RPM. Brush holders are insulated against the aluminum casting to prevent the moisture-leak fault common on garden-tractor starters. The drive end sheds water and grass dust, and the mounting ears are thick enough to survive repeated bolt-on service without cracking - a known weak point on cheaper copies.
Replaces starters that click but do not crank (burned armature or flat-spot brushes), that grind on start (broken pinion teeth or a collapsed drive), and that drag slowly (weak magnets or corroded connections inside the can). It also ends the parts-counter guessing game for the 491308 / 497453 / 690658 chain: any of the three OEM numbers, or the John Deere LG numbers, points to this one unit. A caution for buyers: catalog confusion exists between the three 24-tooth B&S starters, so match the 8.7 mm holes / 97.3 mm spacing / 170 mm length against the old unit before ordering.
A same-day starter swap keeps a spring repair ticket profitable instead of turning into an engine-diagnostics rabbit hole; the single B+ connection means no comeback from miswired solenoids. For distributors, the combined B&S + John Deere cross-reference set captures search traffic from both parts ecosystems, and MOQ 50 / 15-30 day lead time fits normal seasonal stocking.12-month warranty and ISO/IATF/CE-backed production keep claim rates and channel risk low.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Briggs & Stratton | Briggs & Stratton Intek V-Twin (40/44 ci, 656-724cc, 18-26 HP) | Intek V-Twin 40/44 | 1985–2026 |
| John Deere | John Deere L118/L120/L130 Riding Mower (B&S Intek V-Twin 655cc, 2003-2005) | L118/L120/L130 | 1985–2026 |