




12 V | 24-tooth steel pinion | counter-clockwise (CCW)
Pinion: 24 teeth, outer diameter 58 mm (2.283 in) - the largest in this 24-tooth family
Mounting holes: 2-hole flange, two 8.3 mm plain holes (unthreaded), bolted directly to the cylinder body
Housing length: field case 93 mm (3.66 in)
Electrical connection: single B+ main power stud, housing as earth ground; PMDD permanent-magnet direct drive; net weight approx. 2.34 kg
Compatible Engines: Briggs & Stratton agricultural / industrial / commercial power platforms; some catalogs also list 18-26 HP Intek V-twin applications
Compatible Models: lawn tractors, garden tractors, zero-turn mowers, generators, pressure washers, air compressors, industrial pumps
Replaces: early B&S number 496760
12V permanent-magnet direct-drive starter designed specifically for heavy-duty lawn care and multi-purpose power equipment. 24-tooth steel pinion delivers strong engagement torque, and the corrosion-resistant housing withstands dust, vibration and damp conditions, making it an ideal replacement for equipment that struggles to start.
This starter targets distributors and repair shops serving mixed fleets: riding mowers, generators, pressure washers and compressors that all share Briggs & Stratton industrial power platforms. Because one unit replaces both 498149 and 496760 enquiries, it is the natural consolidation SKU for 24-tooth industrial line, cutting the number of part numbers a warehouse must stock without narrowing coverage.
Inside they can permanent magnets replace wound field coils, so the full battery current goes into the armature instead of heating field windings. That is why a PMDD starter of this size spins a large-displacement engine on less current than an old wound-field unit. 24-tooth pinion rides on a Bendix-style inertia drive: as the armature accelerates, the pinion screws forward along its shaft thread into the ring gear, and once the engine fires, the flywheel outruns the pinion and throws it back clear. Steel gear teeth and a hardened sleeve keep that daily hammer-in engagement from peening the gear profile.
Windings are pure copper for low resistance and cool running; brushes are sized for several hundred cold starts, not just one season. The drive-end housing is sealed against grass dust, rain splash and wash-down water - the two failures that kill field starters are commutator contamination and gear tooth wear, and both are addressed here. The can finish resists fertilizer and rain corrosion, so the starter survives a season mounted next to a spreader as well as one stored in a barn.
Typical failures this part replaces: a clicking solenoid with no crank (worn brushes or a burned armature), grinding engagement noise (a stripped or partially missing pinion tooth), and a starter that spins but will not turn the engine (slipped inertia drive). Because the number covers the older 496760 platform as well, it also solves the "my engine predates the current catalog" problem many owners hit when ordering. One caution to give buyers: this is 24-tooth unit with 58 mm gear diameter and plain mounting holes - it will bolt next to, but not replace, 14-tooth 695479 or 15-tooth 715208, so counting teeth and checking hole spacing before purchase prevents most returns.
For a service shop, a tested, sealed PMDD unit that bolts on in under an hour turns a no-start commercial mower or generator into a same-day fix, protecting the service margin on the whole job. For a distributor, the 5933 / SBS0032 / 410-22037 cross-reference set matches what Lester, Arrowhead and J&N already publish, so the listing shows up in the searches buyers are already running. MOQ 50 with 7-30 day lead time keeps inventory turns practical, and 12-month warranty handles the occasional warranty claim without dispute.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Briggs & Stratton | Briggs & Stratton Intek V-Twin (40/44 ci, 656-724cc, 18-26 HP) | Intek V-Twin 40/44 | 1985–2026 |