




12 V | 24-tooth steel pinion | counter-clockwise (CCW)
Pinion: 24 teeth, outer diameter 57.65 mm (2.270 in)
Mounting holes: 2-hole flange, one 8 mm plain hole + one 8 mm slotted hole (adjustable for gear mesh); drive-end details: pinion protrusion 17 mm, 124 mm from rear / 42 mm from front, pilot approx. 70.5 mm
Housing length: field case 100 mm (3.93 in); overall length 170 mm
Electrical connection: B+ 1/4 in UNC main power stud, housing as earth ground; PMDD permanent-magnet direct drive; net weight approx. 2.36 kg
Compatible Engines: Briggs & Stratton Intek 5-7 HP horizontal single (110 / 111 / 120 / 121 / 126 / 127 / 12S / 12T / 150 / 15T series, 190-206cc)
Compatible Models: Countax, Cub Cadet, Hayter, Husqvarna, John Deere, Lawnflite, MTD, Murray, Snapper, Toro, Wheel Horse, Westwood walk-behind and small riding mowers
12V permanent-magnet direct-drive starter designed for the compact engine bays of walk-behind mowers and small riders. The slotted mounting hole lets the installer fine-tune engagement with the flywheel ring gear, reducing gear noise and premature wear; the sealed housing resists dust and damp, making it an ideal replacement for a mower that struggles to start.
Among 24-tooth B&S starters this one owns the small-engine end: 5-7 HP horizontal singles in walk-behind mowers and compact riders sold across Europe and North America under a dozen brands. Because the same physical starter crosses to Countax, Hayter, MTD, Murray, Snapper, Toro and more, it is the consolidation SKU for European walk-behind starter stock - one line instead of twelve.
190-206cc single does not need massive torque, but it does need consistent mesh: too tight and the starter labors, too loose and teeth chip. The slotted hole solves this at installation - the builder positions the starter so 24-tooth pinion rides the ring gear with even contact, then locks it down. Inside, the PMDD layout (permanent magnets, copper armature) gives quick spin-up with low current draw, and the inertia drive throws the pinion into mesh as the motor accelerates, retracting it the moment the engine fires so the ring gear cannot back-drive the motor.
Pure copper windings and a sealed drive end keep the two classic small-starter failure modes - brush wear from dusty intake air and commutator corrosion from wet grass - off the repair list. The steel pinion is through-hardened; the mounting ears are reinforced because walk-behind engines vibrate far more than riders. The housing finish stands up to fuel spills and outdoor storage.
Replaces starters that spin freely without cranking (stripped pinion or sheared drive pin), that grind (mis-indexed mounting from a previous repair - the slotted hole actually lets you correct this), and that draw slow and heavy (shorted windings or sticking brushes). It also consolidates a dozen brand-specific part numbers into one SKU, ending the "which Hayter number is this" search. Buying caution: 24-tooth family looks identical from a distance - match the 8 mm plain + slotted hole pattern and 100 mm field case against the old unit; the 491308 (8.7 mm holes) and 498149 (8.3 mm holes, 93 mm case) will not fit.
For repair shops, a correctly meshed starter means the customer hears silence-then-fire instead of a gear whine, which is what actually prevents the "it came back noisy" return visit. For distributors, the 5936 / SBS0034 / 410-22026 cross-set matches Lester, Arrowhead and J&N catalogs, and one SKU covering twelve equipment brands keeps the starter bay small and the turnover high. MOQ 50, 7-30 day lead time, 12-month warranty - the same commercial terms as the OEM channel at a workable margin below it.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Briggs & Stratton | Briggs & Stratton 12 ci Horizontal Single (190-206cc, 5-7 HP) | 12 ci horizontal | 1985–2026 |