




12 V | 14-tooth steel pinion | counter-clockwise (CCW)
Pinion: 14 teeth, outer diameter 40.8 mm (1.606 in)
Mounting holes: 2-hole flange, one 8.1 mm plain hole + one slotted hole (both unthreaded)
Electrical connection: single B+ main power stud, housing as earth ground; PMDD permanent-magnet direct drive
Compatible Engines: Briggs & Stratton single vertical OHV 19-21 cubic inch (305-344cc): 111902/111982/111992, 19H232/19H236/19H237, 19L132/19L137/19L236/19L237/19L252, 201312/201317/201332/201437, 204312/204412, 205337/205412, 20H132/20H136/20H137/20H232/20H237, 20L235-20L237, 20S157-20S257, 20T202-20T237, 21S132-21S237, 21T112-21T237
Compatible Models: John Deere, Craftsman, Toro, MTD, Cub Cadet riding mowers and lawn tractors fitted with the engines above
Related-but-different: 693551 / 593934 (Lester 5777) are also 14-tooth but use a different hole pattern and 40.4 mm gear OD - verify against the old unit before ordering
12V permanent-magnet direct-drive starter designed for mainstream single-cylinder riding mowers.14-tooth wear-resistant steel pinion and corrosion-resistant housing withstand dust, vibration and damp conditions, making it an ideal replacement for a lawn tractor that struggles to start.
19/20/21 ci vertical platform is the family-tractor workhorse segment: 305-344cc singles fitted to entry and mid-level riders from John Deere, Craftsman, Toro, MTD and Cub Cadet through the 1990s and 2000s. This starter is the volume replacement for that segment - the part a repair shop orders weekly in spring, and the SKU a distributor can sell across five equipment brands without changing stock numbers.
Permanent magnets give the armature a strong fixed field, so a 305-344cc single spins to compression on less battery current than a wound-field starter of the same frame size. The 14-tooth pinion runs on an inertia drive: it screws into the ring gear as the armature accelerates and retracts the moment the engine catches, which protects the motor from back-drive at firing speed. The slotted mounting hole exists for the installer: center it, then rotate slightly until the pinion rolls over the ring gear silently before final tightening.
Copper windings keep resistance low and heat manageable; the brush set is sized for repeated cold cranks through several seasons. The drive-end seal blocks grass dust and rain - the standard killers of mower starters. The steel pinion is hardened against tooth chipping, and the housing finish resists the fertilizer and moisture environment a lawn tractor lives in.
Replaces units that click without cranking, that grind on engagement (chipped pinion teeth), or that crank slow and die (dragging brushes or weak magnets). It also resolves the hardest diagnosis in this segment: several 14-tooth starters share the same engines but differ in hole pattern and gear diameter (this one versus 693551/593934), so buyers who only count teeth end up with a part that nearly fits. Ordering by the three-point check - teeth, gear OD, hole pattern - eliminates that failure, and this listing states all three up front.
For shops, a starter that bolts in and meshes correctly on the first try keeps spring repair days moving; the low current draw also means many "dead battery" calls are solved with the starter alone. For distributors, 5937 / SBS0038 / 410-22034 / 106-232 cross-set matches every major aftermarket catalog, so the listing competes in the searches buyers already run. MOQ 50 with 7-30 day lead time and 12-month warranty keeps the line low-risk to stock.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Briggs & Stratton | Briggs & Stratton 19-21 ci Vertical OHV (305-344cc, 8-11.5 HP) | 19-21 ci vertical | 1985–2026 |