



12 V | about 0.4 kW | 14 teeth | counter-clockwise (CCW)
Mounting holes: two-hole flange, BOTH holes M8 x 1.25 threaded (unusual for small Honda starters - use bolts, not plain studs)
Pinion: 14 teeth, outer diameter 31.8 mm (1.252 in); rest position approx. 10 mm
Flange diameter: approx. 45 mm
Electrical connection: B+ (M6) main power stud, housing as earth ground; integrated solenoid; Denso B-series PMOSGR / PMGR permanent-magnet gear-reduction type
Compatible Engines: Honda GX240 (7.9 HP) / GX240U, GX270 (8.5 HP / 9.9 HP) / GX270U / GX270R / GX270QAE2 single-cylinder air-cooled
Compatible Models: generators, water pumps, concrete power trowels, compactors, agricultural machinery and other 8-10 HP class general-purpose equipment
12V replacement starter motor reference for Honda GX240 / GX270 single-cylinder air-cooled engines. Honda identifies 31200-ZH9-003 as a starter motor and lists 31200-ZH9-013 and 31210-ZE2-003 as related numbers; the unit is a Denso B-series gear-reduction starter also listed under several Denso 128000-2240 / 128000-9400 numbers, for 8-10HP general-purpose equipment.
Catalog-listed equipment: Honda GX240 / GX270 engines and the 8-10HP equipment listed above. Confirm the OE number, engine model and type code, existing starter number, voltage, pinion tooth count (14), pinion outer diameter (31.8 mm), rotation, mounting hole type (both M8 threaded), field case / overall length, terminal layout and physical dimensions before purchase. Exact 31200-ZH9-003 length, width and height have not been verified and are omitted.
Critical identification: this unit shares 14 teeth and the Denso system with Toro 31210-ZB8-0130, but it is a 0.4 kW unit with an approx. 45 mm flange for GX240 / GX270 (8-10HP), while ZB8-0130 is 0.5 kW for GX340 / GX390 (11-13HP) - distinguish them by engine displacement and OE number. Both mounting holes are M8 threaded, whereas most small Honda starters use plain holes; using the wrong bolt specification is the most common reason for returns on this model, so the page should highlight it. One SKU covers Honda 31200-ZH9-003 / -013, 31210-ZE2-003 and multiple Denso numbers across a large base of 8-10HP equipment.
This listing is organized for general-purpose engine procurement teams, repair shops and parts distributors searching by engine model and OEM reference. Standard supply terms listed for this reference: MOQ 50 pieces, lead time 15-30 days, 12-month warranty, ISO 9001 / IATF 16949 / CE certification. These are indicative values. For a quotation, specify the engine model, old-part number, required quantity and destination. Confirm price, stock, package quantity, warranty, certification documents and delivery terms with the seller before placing a purchase order.
Honda's GX240 and GX270 engines run the quiet middle of the rental and farm market - concrete trowels, plate compactors, transfer pumps, job-site generators. Rental houses and contractors beat these engines up in ways homeowners never will, and the starter feels it first. Honda splits the number across 31200-ZH9-003 / -013 and 31210-ZE2-003, and Denso lists the same unit under seven 128000 numbers, so buyers arrive with any of ten references and still want the same part. This listing catches all of them with one SKU and makes the M8-threaded-hole detail impossible to miss, because that is what sends parts back.
This is a gear-reduction starter, not a direct-drive one. The armature spins fast through copper windings, and an internal gear train steps that speed down at the pinion, trading RPM for torque - the reason a 0.4 kW motor can snap a 270cc engine over without a heavy battery draw. Turning the key energizes the integrated solenoid, which slides the 14-tooth pinion into the ring gear before main current flows, so the gears mesh before they spin. The Denso B-series body carries the solenoid on the starter itself; there is no external relay to wire, just the B+ (M6) stud and the housing earth. Rotation is counter-clockwise at the pinion end, matching the GX flywheel.
Four complaints bring these engines in. A slow, tired crank on an engine that used to fire right up. A click but no turnover - the solenoid's main contacts have burned. A whirring spin that never grabs - the pinion has stripped or the Bendix stopped throwing. Or grinding on engagement from a gear that no longer meets the ring gear cleanly. A complete replacement answers all four at once, which is cheaper than an hour of bench diagnosis on a unit this size. The one mistake to head off: thread both mounting bolts into the M8 threaded holes. Plain studs from a 7 mm-hole Honda starter will cross-thread the flange, and that damage comes back as a return.
Shops get a direct bolt-in with no relay wiring, a 45 mm flange that lands exactly where the original sat, and a starter that brings a rental unit back inside a day. Distributors get the stronger story: MOQ 50,7-30 day lead time, 12-month warranty, ISO 9001 / IATF 16949 / CE paperwork, and pricing with real room under OEM. One line covers trowels, compactors, pumps and generators across the 8-10 HP class, and the ten factory and aftermarket cross-numbers keep catalog searches landing here instead of at a competitor.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Honda | Honda GX240 (single-cylinder OHV 7.9 HP) | GX240 | 1985–2026 |
| Honda | Honda GX270 (single-cylinder OHV 9 HP) | GX270 | 1985–2026 |