Current Path:All Categories>Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin
Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin

Honda 31200-ZJ1-004 lawn mower starter motor | 12V 10-tooth | GX610 GX620 V-twin

Product Code:P20261117132625670
Brand:Honda
$35.00
50+

Core Advantages

  • ● 1. Performance Selling Points | Materials and Craftsmanship Built for Honda's big GX610 / GX620 twins: 0.6 kW through a 10-tooth steel gear, enough to swing an 18-20 HP V-twin past compression on the first pull of the key. Upgraded permanent magnets and pure copper windings hold that torque when the battery is half-charged and the morning is cold. The whole unit weighs about 2.4 kg and is sealed against dust and rain - generator duty, in other words.
  • ● 2. Model Fitment | Compatibility Specifications Primary OE: Honda 31200-ZJ1-004 (related: 31200-ZJ1A-0040, 31200-ZJ4-003). Cross-references: Johnson Electric 5680640 / SM56804 / MS-6017; United Technologies 5680640-M030SM; Lester 5918 / 5918N; Arrowhead SAB0133 / 410-21030; J&N 410-21030; Stens 435-269; Rotary 11079; WAI 5918N / 2-2663-UT; Delco Remy RS41060; Cargo 113594; AS-PL UD13677S / S9600S; PSH 120.023.102.200; Woodauto STR88236. Fits Honda GX610 (18 HP) / GX620 (20 HP) / GXV610 / GXV620 and GX630RH, 614cc V-twin OHV air-cooled vertical-shaft engines - Honda EB11000 / EB11000A generators, HA4118 / HA4120 riding mowers, HRC7020 walk-behind mowers, Ditch Witch 1820 trenchers (1995-2005), Rammax FP2SP / SP2 compactors, Terramite T5C (1991-2005), Bush Hog CS180T. Key parameters: 10-tooth gear, pinion OD 30.9 mm, two 8.9-9.0 mm plain (unthreaded) holes, field case 88.9 mm, overall approx. 188 mm, B+ 1/4 in UNC stud, CCW rotation.
  • ● 3. Installation and Use | Experience Advantages Plain 9 mm holes and a single 1/4 in power stud - the original bolts and cable go straight back on, nothing to drill or rewire. The 88.9 mm field case and 188 mm overall length sit inside the original envelope on generator decks and mower frames alike. Most installations run 45 minutes to an hour with hand tools, and the machine earns again the same day.
  • ● 4. Safety and After-Sales | Cost-Effectiveness 12-month warranty; production follows ISO 9001 and ISO/TS 16949 practice. MOQ 50 pieces, 7-30 day lead time. This SKU serves three markets at once - large generators, riding mowers and construction equipment - and industrial customers replace rather than rebuild, so returns stay low and pricing carries real room under OEM.

OEM Numbers

OEM Number

Honda31200-ZJ1-004

Replacement Number

Honda31200-ZJ1A-0040
Honda31200-ZJ4-003
Johnson Electric5680640
Johnson ElectricSM56804
Johnson ElectricMS-6017
United Technologies5680640-M030SM
Lester5918 / 5918N
ArrowheadSAB0133
J&N410-21030
Stens435-269
Rotary11079
WAI5918N / 2-2663-UT
Delco RemyRS41060
Cargo113594
AS-PLUD13677S / S9600S
PSH120.023.102.200
WoodautoSTR88236

Factory Number

-

Technical Parameters

rated_voltage
12V
rotation_direction
CCW
rated_power
600W
installation_size
2-Hole Flange (two 8.9-9.0 mm plain unthreaded holes), field case 88.9 mm, overall approx. 188 mmmm
moq
50pcs
delivery_lead_time
7-30days
warranty_period
12months
certification
ISO 9001 / IATF 16949 / CE
stator_conductor_material
Pure copper winding
rotor_conductor_material
Pure copper winding
operating_environment
gasoline-engine starting system/garden equipment/outdoor lawn
gear_teeth
10

Product Overview

12 V | about 0.6 kW | 10 teeth | counter-clockwise (CCW)

Overall length: approximately 188 mm; field case length 88.9 mm (3.5 in); pilot outer diameter approx. 66 mm

Mounting holes: two-hole flange, two 8.9-9.0 mm plain holes (unthreaded), bolted directly to the block

Pinion: 10 teeth, outer diameter 30.9 mm (1.217 in)

Electrical connection: B+ 1/4 in UNC main power stud, housing as earth ground; PMDD permanent-magnet direct drive (Johnson Electric / United Technologies type); net weight approx. 2.41 kg

Compatible Engines: Honda GX610 (18 HP) / GX620 (20 HP) / GXV610 / GXV620 and GX630RH, 614cc V-twin OHV air-cooled vertical-shaft

Compatible Models:

Honda: EB11000 / EB11000A generators, HA4118 / HA4120 riding mowers, HRC7020 walk-behind mower

Construction: Ditch Witch 1820 trencher (1995-2005), Rammax FP2SP / SP2 compactors, Terramite T5C (1991-2005), Bush Hog CS180T

12V replacement starter motor reference for Honda GX610 / GX620 V-twin air-cooled engines. Honda identifies 31200-ZJ1-004 as a starter motor and lists 31200-ZJ1A-0040 and 31200-ZJ4-003 as related numbers; the unit is a Johnson Electric / United Technologies PMDD starter also listed under Lester 5918, for generators, large riding mowers and construction equipment.

OEM and Search References

  • Primary reference: 31200-ZJ1-004 (Honda)
  • Substitute reference: Honda 31200-ZJ1A-0040 / 31200-ZJ4-003; Johnson Electric 5680640 / SM56804 / MS-6017; United Technologies 5680640-M030SM; Lester 5918 / 5918N; Arrowhead SAB0133 / 410-21030; J&N 410-21030; Stens 435-269; Rotary 11079; WAI 5918N / 2-2663-UT; Delco Remy RS41060; Cargo 113594; AS-PL UD13677S / S9600S; PSH 120.023.102.200; Woodauto STR88236
  • Equipment search: Honda GX610 (18HP) / GX620 (20HP) / GXV610 / GXV620 and GX630RH, 614cc V-twin OHV air-cooled vertical-shaft engines; Honda EB11000 / EB11000A generators, HA4118 / HA4120 riding mowers, HRC7020 walk-behind mower; Ditch Witch 1820 trencher (1995-2005), Rammax FP2SP / SP2 compactors, Terramite T5C (1991-2005), Bush Hog CS180T and similar construction equipment
  • Buyer search terms: Honda 31200-ZJ1-004 starter, GX620 starter motor, GX610 starter, Honda EB11000 starter, Lester 5918 starter, 10 tooth V-twin starter, 18HP engine starter motor, industrial generator replacement parts

Reference Specifications

  • System voltage: 12V DC, as stated in the product title.
  • Power: 0.6 kW, reported by compatible replacement listings cross-referenced to 31200-ZJ1-004.
  • Pinion: 10 teeth, reported by compatible replacement listings cross-referenced to 31200-ZJ1-004.
  • Rotation: counterclockwise (CCW, viewed from the pinion / drive end; some overseas catalogs label the same rotation CW when viewed from the motor rear), reported by compatible replacement listings cross-referenced to 31200-ZJ1-004.
  • Mounting and interfaces: two-hole flange with two 8.9-9.0 mm plain holes (unthreaded); pinion outer diameter 30.9 mm (1.217 in); field case length 88.9 mm (3.5 in); overall length approx. 188 mm; pilot outer diameter approx. 66 mm; B+ 1/4 in UNC main power stud with case ground; PMDD permanent-magnet direct drive (Johnson Electric / United Technologies type); net weight approx. 2.41 kg.
  • These pinion, rotation, power and mounting details are not confirmed Honda factory specifications. Match them against the removed unit before ordering.

Fitment and Purchase Checks

Catalog-listed equipment: Honda GX610 / GX620 / GXV610 / GXV620 engines and the Honda, Ditch Witch, Rammax, Terramite and Bush Hog machines listed above. Confirm the OE number, engine model and spec number, existing starter number, voltage, pinion tooth count (10), pinion outer diameter (30.9 mm), rotation, mounting hole type (9 mm plain holes), field case length (88.9 mm), overall length (approx. 188 mm), terminal layout and physical dimensions before purchase. Exact 31200-ZJ1-004 length, width and height have not been verified and are omitted.

Critical identification: a completely different platform from Honda 31210-ZE1-023 (17 teeth, GX160 single) and Honda 31200-ZH9-003 (14 teeth, GX240 / GX270 single) - this 10-tooth, 0.6 kW unit is only for the GX610 / GX620 614cc 18-20HP V-twins. Its 9 mm plain mounting holes differ from the M8 threaded holes of the same-brand 14-tooth unit; selection must check tooth count, hole diameter and the 88.9 mm field case together. The SKU serves three end markets - generators, large riding mowers and construction machinery (Ditch Witch / Terramite / Rammax) - and is a higher-value industrial item with a low return rate.

For Agricultural Buyers and Distributors

This listing is organized for industrial and outdoor power equipment procurement teams, repair shops and parts distributors searching by equipment model and OEM reference. Standard supply terms listed for this reference: MOQ 50 pieces, lead time 15-30 days, 12-month warranty, ISO 9001 / ISO/TS 16949 certification. These are indicative values. For a quotation, specify the engine model, old-part number, required quantity and destination. Confirm price, stock, package quantity, warranty, certification documents and delivery terms with the seller before placing a purchase order.

Product Positioning

The GX610 / GX620 twins run jobs where downtime has a price tag: EB11000 generators holding lights and tools on site, HA-series riders maintaining grounds, Ditch Witch trenchers and Terramite loaders mid-project. When one of these fails to start, the customer is not mowing a lawn - they are losing rental days or crew hours. Honda spreads the number across 31200-ZJ1-004 / ZJ1A-0040 / ZJ4-003 and the original equipment builders (Johnson Electric, United Technologies) list their own, so buyers show up with a handful of references for one physical part. This listing anchors them all and states the 9 mm plain-hole, 88.9 mm field-case identity plainly, because those two measurements are what separate this unit from every other Honda starter on the shelf.

How It Works: Power and Engagement

The unit is a permanent-magnet direct-drive design. The key sends current to the 1/4 in stud, the copper-wound armature spins between upgraded permanent magnets, and the 10-tooth gear rides out on its Bendix sleeve into the ring gear as RPM builds. Once the twin fires, the gear retracts and the engine leaves the starter behind - no solenoid shift mechanism in the circuit to burn or stick. The 30.9 mm pinion is geared for the 614cc twin's compression, not a small single's, which is why this unit carries 0.6 kW where the GX160-class starter carries 0.4. Rotation at the pinion is counter-clockwise, matching the Honda flywheel direction.

Materials and Durability

  • Gear: 10-tooth hardened steel pinion, sized for V-twin compression loads.
  • Magnets: upgraded high-induction ferrite field, holding strength through generator heat soak.
  • Windings: pure copper for low resistance - important on job sites where the battery rarely sits at full charge.
  • Brushes: wear-resistant carbon in a sealed holder, protected from concrete dust and trench spoil.
  • Housing: sealed 88.9 mm case, approx. 2.41 kg, standing up to rain and wash-down on industrial machines.

Problems It Solves

These machines arrive with a familiar set of faults. Cranking that slows to a crawl, hot or cold - weakened magnets or worn brushes in the original. Grinding at start-up - the gear has stopped reaching full mesh. A healthy spin that never turns the engine - stripped gear or a Bendix that quit throwing. Or a click and nothing - contacts or solenoid circuit gone. A whole-unit swap clears all of them without bench time. The check that matters before ordering: measure the mounting holes (9 mm plain, not M8 threaded) and the field case (88.9 mm). Both numbers separate this unit from the 14-tooth GX240/270 starter that otherwise looks like its twin.

Replacement Value for Shops and Distributors

For shops, it is a straight bolt-in that puts a generator or trencher back on the job the same day, with the original cable and bolts. For distributors, the economics are clean: MOQ 50, 7-30 days, 12-month warranty, ISO 9001 / ISO/TS 16949 documentation, and pricing that sits well below OEM on an industrial part customers replace rather than rebuild. Three end markets - generators, riders, construction iron - draw on one stock line, and the seventeen cross-references keep it findable from any catalog path.

Vehicle Fitment

BrandModelModel CodeYear
HondaHonda GX610 (V-Twin 18 HP)GX6101998–2026
HondaHonda GX620 (V-Twin 20 HP)GX6201998–2026

Send Inquiry

To:
平台自营旗舰店
*Message:
Your Email: