




StarterStock TTM03 is an aftermarket tilt and trim motor for selected Johnson, Evinrude and OMC Sea Drive applications using the 0391264 / 391264 motor family. It drives the hydraulic pump that positions the engine. Compatibility depends on the original trim assembly, mounting configuration and part number; the horsepower range in the product title does not imply universal fit.
The motor converts electrical energy into mechanical rotation to power the compatible hydraulic pump. Reversing polarity through the correct two-wire control circuit changes rotation direction so the system can raise or lower the engine and adjust trim. This product serves the tilt and trim hydraulic system rather than the engine cranking mechanism.
The referenced replacement configuration uses a three-bolt mount and two-wire electrical connection with male blade terminal ends. ARCO 6220 lists 96-inch leads for its equivalent replacement; confirm the lead length and terminal arrangement of the supplied TTM03. Compare the flange, bolt spacing, shaft coupling and sealing surfaces with the original motor before fitting. Install the appropriate seal and follow the engine manufacturer’s service procedure.
The main reference is OMC 0391264, also written as 391264. Related numbers include 393259, 393988, 394176, 395840, 434795, 983019, 983446 and 985237. Aftermarket cross-references include ARCO 6220, Sierra 18-6759, Arrowhead TRM0004 and Quicksilver 8M6014150. Catalog applications span selected engines and model years; confirm the original motor and trim-system design rather than choosing by horsepower alone.
Slow, intermittent or absent tilt movement can result from battery or relay problems, cable resistance, hydraulic leakage, low fluid or motor wear. Check the electrical supply and hydraulic system before replacing the motor. When the motor is confirmed defective, TTM03 offers a focused repair option while retaining the serviceable pump and hydraulic components. Keep connections protected and sealing surfaces in good condition. No immersion rating, salt-spray test or product certification should be assumed without documentation for the supplied unit.
| Brand | Model | Model Code | Year |
|---|---|---|---|
| Johnson/Evinrude | Johnson/Evinrude 60HP 2-Cyl | 3-Bolt Trim 0391264 | JE-60HP-2CYL-TRIM391264 | 1987–1987 |
| Johnson/Evinrude | Johnson/Evinrude 60HP 3-Cyl | 3-Bolt Trim 0391264 | JE-60HP-3CYL-TRIM391264 | 1986–1991 |
| Johnson/Evinrude | Johnson/Evinrude 70HP 3-Cyl | 3-Bolt Trim 0391264 | JE-70HP-3CYL-TRIM391264 | 1981–1991 |
| Johnson/Evinrude | Johnson/Evinrude 75HP 3-Cyl | 3-Bolt Trim 0391264 | JE-75HP-3CYL-TRIM391264 | 1981–1987 |
| Johnson/Evinrude | Johnson/Evinrude 85HP 4-Cyl | 3-Bolt Trim 0391264 | JE-85HP-4CYL-TRIM391264 | 1988–1992 |
| Johnson/Evinrude | Johnson/Evinrude 88HP 4-Cyl | 3-Bolt Trim 0391264 | JE-88HP-4CYL-TRIM391264 | 1988–1990 |
| Johnson/Evinrude | Johnson/Evinrude 90HP 4-Cyl | 3-Bolt Trim 0391264 | JE-90HP-4CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 100HP 4-Cyl | 3-Bolt Trim 0391264 | JE-100HP-4CYL-TRIM391264 | 1984–1991 |
| Johnson/Evinrude | Johnson/Evinrude 110HP 4-Cyl | 3-Bolt Trim 0391264 | JE-110HP-4CYL-TRIM391264 | 1986–1989 |
| Johnson/Evinrude | Johnson/Evinrude 115HP 4-Cyl | 3-Bolt Trim 0391264 | JE-115HP-4CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 120HP 4-Cyl | 3-Bolt Trim 0391264 | JE-120HP-4CYL-TRIM391264 | 1985–1990 |
| Johnson/Evinrude | Johnson/Evinrude 125HP 4-Cyl | 3-Bolt Trim 0391264 | JE-125HP-4CYL-TRIM391264 | 1989–1990 |
| Johnson/Evinrude | Johnson/Evinrude 140HP 4-Cyl | 3-Bolt Trim 0391264 | JE-140HP-4CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 150HP 6-Cyl | 3-Bolt Trim 0391264 | JE-150HP-6CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 155HP 6-Cyl | 3-Bolt Trim 0391264 | JE-155HP-6CYL-TRIM391264 | 1984–1991 |
| Johnson/Evinrude | Johnson/Evinrude 175HP 6-Cyl | 3-Bolt Trim 0391264 | JE-175HP-6CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 185HP 6-Cyl | 3-Bolt Trim 0391264 | JE-185HP-6CYL-TRIM391264 | 1984–1990 |
| Johnson/Evinrude | Johnson/Evinrude 200HP 6-Cyl | 3-Bolt Trim 0391264 | JE-200HP-6CYL-TRIM391264 | 1981–1990 |
| Johnson/Evinrude | Johnson/Evinrude 225HP 6-Cyl | 3-Bolt Trim 0391264 | JE-225HP-6CYL-TRIM391264 | 1986–1990 |
| Johnson/Evinrude | Johnson/Evinrude 235HP 6-Cyl | 3-Bolt Trim 0391264 | JE-235HP-6CYL-TRIM391264 | 1981–1985 |