Current Path:All Categories>Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled
Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled

Kohler 17-098-05 lawn mower starter motor | 12V 14-tooth | single-cylinder air-cooled

Product Code:P20261117161914130
Brand:Kohler
$30.00
50+

Core Advantages

  • ● 1. Performance Selling Points | Materials and Craftsmanship A 12V Denso-pattern gear-reduction starter (PMOSGR) for Kohler CH440 / ECH440 429cc professional-series singles. The reduction head multiplies torque, so the 429cc high-compression CH440 spins to life fast even in cold weather, while drawing less current than a direct-drive unit of the same size. Copper windings, an integrated solenoid sealed against water and grass dust, and a 14-tooth steel pinion (33.9 mm OD); every unit is load-tested before packing.
  • ● 2. Model Fitment | Compatibility Specifications Primary OE: Kohler 17-098-05 (factory chain 17-098-05 / 17-098-05S / 17-098-11 / 17-098-11-S - any of the four points to this unit). Cross-references: Denso QD182-700; Lester 19883; Arrowhead SCH0068; J&N / DB Electrical 410-52256 / 410-52278; MCR SCH0068. Fits Kohler CH440 / CH440-3111 and ECH440 (EFI) 429cc single air-cooled OHV 14 HP. Key identification: 14-tooth pinion, 33.9 mm gear OD, two M8 x 1.25 threaded mounting holes, Denso gear-reduction body with built-in solenoid. Not interchangeable with the 13-tooth Kohler 12-098-05 (Command CH11-15) or with B&S 14-tooth starters that use plain holes.
  • ● 3. Installation and Use | Experience Advantages Both mounting holes are M8 threaded, so the starter bolts to the block with two bolts and no shims; the integrated solenoid means one B+ cable and no external start relay - connect the stud and go. Typical swap is 30-45 minutes with hand tools. The gear-reduction body also spins the pinion faster on less current, which noticeably helps CH440-powered equipment with aging batteries or long cable runs on commercial machines.
  • ● 4. Safety and After-Sales | Cost-Effectiveness 12-month warranty, production practice to ISO 9001, IATF 16949 and CE. MOQ 50 pieces, 7-30 day lead time. The four-number Kohler factory chain plus Denso / Lester / Arrowhead / J&N cross-refs gives this SKU strong search coverage across both OEM and aftermarket catalogs; pricing sits at a workable margin below OEM rates, and one part serves the CH440 and ECH440 platforms at once - generators, professional mowers and compact machinery.

OEM Numbers

OEM Number

Kohler17-098-05

Replacement Number

Kohler17-098-05S
Kohler17-098-11
Kohler17-098-11-S
DensoQD182-700
Lester19883
ArrowheadSCH0068
J&N / DB Electrical410-52256 / 410-52278
MCRSCH0068

Factory Number

-

Technical Parameters

rated_voltage
12V
rotation_direction
CCW
rated_power
Per OEM nameplateW
installation_size
2-Hole Flange (two M8 x 1.25 threaded holes), pinion OD 33.9 mmmm
moq
50pcs
delivery_lead_time
7-30days
warranty_period
12months
certification
ISO 9001 / IATF 16949 / CE
stator_conductor_material
Pure copper winding
rotor_conductor_material
Pure copper winding
operating_environment
gasoline-engine starting system/garden equipment/outdoor lawn
gear_teeth
14

Product Overview

Reference Specifications

12 V | 14-tooth steel pinion | counter-clockwise (CCW)

Pinion: 14 teeth, outer diameter 33.9 mm (1.335 in)

Mounting holes: 2-hole flange, two M8 x 1.25 threaded holes (use bolts, not plain studs)

Structure: Denso-type PMOSGR permanent-magnet gear-reduction with integrated solenoid; gear reduction gives higher cranking torque per amp than direct drive

Electrical connection: single B+ main power stud, housing as earth ground

Compatible Engines: Kohler CH440 / CH440-3111 and ECH440 (EFI), 429cc single-cylinder air-cooled OHV 14 HP professional series

Compatible Models: riding mowers, lawn and garden tractors, professional outdoor equipment powered by CH440 / ECH440 engines

Replaces: 17-098-05 / 17-098-05S / 17-098-11 / 17-098-11-S (current), Denso QD182-700

A Denso-built 12V gear-reduction starter designed for the Kohler CH440 professional series. The reduction gearing delivers strong cranking torque from a compact motor, and the fully sealed solenoid and corrosion-resistant housing withstand dust, vibration and damp conditions - an ideal replacement for professional equipment that has become hard to start.

Product Positioning

The CH440 is Kohler's current professional-grade 429cc single, powering commercial mowers, industrial equipment and premium generators. This starter is the aftermarket answer for that platform: it carries the full Kohler factory number chain (17-098-05 through 17-098-11-S) plus the Denso QD182-700 and the major aftermarket cross-references, so one SKU catches enquiries arriving from four different parts vocabularies.

How It Works: Power and Engagement

The gear-reduction head is the point of difference: the armature spins fast in a small-diameter motor, and planetary reduction stage multiplies torque at the pinion shaft. That is how compact Denso-pattern body turns 429cc high-compression single as briskly as a much larger direct-drive starter, on less current. The solenoid is built onto the body and shifts the 14-tooth pinion into mesh before the motor spins, so engagement is positive with no inertia grind, and retracts the instant the engine fires.

Materials and Durability

Pure copper windings and brushes sized for professional daily-start duty; the solenoid and drive end are sealed against wash-down water, grass dust and rain - the failure modes that end starter life on commercial equipment. The pinion is hardened steel; the housing finish resists fuel and fertilizer corrosion. Reduction gears run on sealed bearings that never need attention during service life.

Problems It Solves

Replaces starters that click but do not crank (worn brushes or failed armature), that grind (damaged pinion teeth or collapsed solenoid shift), and that crank weakly (weak magnets or internal corrosion). It also ends two recurring parts-counter confusions: first, 17-098-05 / 05S / 11 / 11-S chain now maps to one unit; second, buyers comparing it with the older Kohler 12-098-05 see two nearly identical Kohler numbers - this one is 14-tooth, gear-reduction, M8 threaded holes, CH440; that one is 13-tooth, direct drive, Command platform. The listing states all three checks so the wrong order never ships.

Replacement Value for Shops and Distributors

For a service shop, a tested gear-reduction unit that bolts into the CH440 platform in under an hour turns a commercial no-start into a same-day repair with no wiring surprises, because the solenoid is integrated. For distributors, the Denso / Lester / Arrowhead / J&N cross-set puts the listing in every relevant catalog search, and MOQ 50 with 7-30 day lead time matches standard stocking cycles; 12-month warranty and ISO / IATF / CE-backed production keep the line defensible.

Vehicle Fitment

BrandModelModel CodeYear
KohlerKohler CH440 (429cc, 14 HP)CH4401985–2026

Send Inquiry

To:
平台自营旗舰店
*Message:
Your Email: