Current Path:All Categories>Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled
Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled

Kohler 32-098-08 lawn mower starter motor | 12V 9-tooth | Courage Twin air-cooled

Product Code:P20261117131907353
Brand:Kohler
$26.50
50+

Core Advantages

  • ● 1. Performance Selling Points | Materials and Craftsmanship This is the 1.0 kW heavy-duty unit in the Kohler starter range, sized for 20-27 HP Courage Twin engines. The 9-tooth gear is hardened steel, the armature runs in pure copper windings, and the whole motor is sealed against the grass dust and wash water a commercial zero-turn lives with. What you notice at the key is the crank speed: big twins spin over briskly instead of dragging through the first compression stroke.
  • ● 2. Model Fitment | Compatibility Specifications Primary OE: Kohler 32-098-08 (also 32-098-08-S / 32-098-08S / 3209808). Earlier 10-tooth numbers 32-098-01-S / 32-098-03-S / 32-098-04-S and later 32-098-10-S are related service references. Cross-references: Cub Cadet KH-32-098-08-S; New Holland / Case K0H3209801S; Lester 34009 / 34009N; WAI 34009N; Arrowhead 410-21100; J&N 410-21111; DB Electrical 410-21081; Stens 055-681; Rotary 1999-1140051. Fits Kohler Courage Twin SV710 through SV840 (725cc V-twin, 20-27 HP), 7000 Series KT715-KT745, Confidant ZT710-ZT740, 6600 Series KT600-KT620 and 7500 EFI EKT740 / EKT750. Equipment: Cub Cadet LT1045 / LT1046 / SLT1550 / SLT1554 / i1046 / i1050 / RZT42-54 / XT1 / XT2 / Z-Force; Toro TimeCutter Z4202 / Z5020 / Z5060, Titan Z4800 / Z5200, GT2100-GT2300, LX425 / LX468 / LX500 / SL500; New Holland G4030 / G4035 / G4050; selected Hustler models. Key parameters: 9-tooth steel gear, pinion OD 29.5 mm, one 9.6 mm plain hole plus one 9.9 x 10.8 mm slotted hole, overall length 202.9 mm, single B+ stud, CCW rotation.
  • ● 3. Installation and Use | Experience Advantages The flange bolts to the original bosses with no drilling or rework, and the slotted hole is the practical bonus: loosen it a fraction and you can trim the pinion-to-ring-gear gap, which quiets a noisy engagement on an otherwise good flywheel. Battery off, two bolts, one stud nut - most shops are done inside the hour and the mower is back on the route the same day.
  • ● 4. Safety and After-Sales | Cost-Effectiveness Covered for 12 months, built to ISO 9001, IATF 16949 and CE practice. MOQ is 50 pieces with a 7-30 day lead time, enough to keep the shelf stocked without tying up cash. Unit pricing runs well under OEM channels, so a shop can quote a fair price and still hold margin.

OEM Numbers

OEM Number

Kohler32-098-08

Replacement Number

Kohler32-098-08-S
Kohler32-098-08S / 3209808
Kohler32-098-01-S
Kohler32-098-03-S
Kohler32-098-04-S
Kohler32-098-10-S
Cub CadetKH-32-098-08-S
New Holland / CaseK0H3209801S
Lester34009 / 34009N
WAI34009N
Arrowhead410-21100
J&N410-21111
DB Electrical410-21081
Stens055-681
Rotary1999-1140051

Factory Number

-

Technical Parameters

rated_voltage
12V
rotation_direction
CCW
rated_power
1000W
installation_size
2-Hole Flange (1 plain 9.6 mm + 1 slotted 9.9 x 10.8 mm)mm
moq
50pcs
delivery_lead_time
7-30days
warranty_period
12months
certification
ISO 9001 / IATF 16949 / CE
stator_conductor_material
Pure copper winding
rotor_conductor_material
Pure copper winding
operating_environment
gasoline-engine starting system/garden equipment/outdoor lawn
gear_teeth
9

Product Overview

12 V | about 1.0 kW | 9 teeth | counter-clockwise (CCW)

Overall length: approximately 202.9 mm (7.988 in)

Mounting holes: two-hole flange - one 9.6 mm plain hole and one 9.9 x 10.8 mm slotted hole (the slotted ear allows fine adjustment of pinion-to-ring-gear clearance), bolted directly to the Kohler block

Electrical connection: single B+ main power stud, housing as earth ground; PMDD permanent-magnet direct drive; net weight approx. 2.0-2.3 kg

Compatible Engines: Kohler Courage Twin SV710 / SV715 / SV720 / SV725 / SV730 / SV735 / SV740 / SV810 / SV815 / SV820 / SV830 / SV840 (725cc V-twin OHV air-cooled, 20-27 HP); 7000 Series KT715 / KT725 / KT730 / KT735 / KT740 / KT745; Confidant ZT710-ZT740; 6600 Series KT600-KT620; 7500 Series EFI EKT740 / EKT750

Compatible Models:

Cub Cadet: LT1045 / LT1045LE / LT1046 / SLT1550 / SLT1554 / i1046 / i1050 / RZT42 / RZT50 / RZT54 / XT1 / XT2 / Z-Force series

Toro: TimeCutter Z4202 / Z5020 / Z5060, Titan Z4800 / Z5200, GT2100 / GT2200 / GT2300, LX425 / LX468 / LX500 / SL500

New Holland: G4030 / G4035 / G4050; selected Hustler models

12V replacement starter motor reference for Kohler Courage Twin V-twin air-cooled engines. Kohler identifies 32-098-08 as a starter motor, lists the -S service numbers 32-098-08-S / 32-098-08S and earlier 10-tooth numbers as related references, and includes the Courage Twin and 7000 Series engines in its equipment catalog for Cub Cadet, Toro, New Holland / Case and Hustler mowers.

OEM and Search References

  • Primary reference: 32-098-08 (Kohler)
  • Substitute reference: Kohler 32-098-08-S / 32-098-08S / 3209808, 32-098-01-S / 32-098-03-S / 32-098-04-S (early 10-tooth version) / 32-098-10-S; Cub Cadet KH-32-098-08-S; New Holland / Case K0H3209801S; Lester 34009 / 34009N; WAI 34009N; Arrowhead / J&N / DB Electrical 410-21100 / 410-21111 / 410-21081; Stens 055-681; 1999-1140051
  • Equipment search: Kohler Courage Twin SV710-SV840 (725cc V-twin OHV air-cooled, 20-27HP), 7000 Series KT715-KT745, Confidant ZT710-ZT740, 6600 Series KT600-KT620 and 7500 Series EFI EKT740 / EKT750; Cub Cadet LT1045 / LT1045LE / LT1046 / SLT1550 / SLT1554 / i1046 / i1050 / RZT42-54 / XT1 / XT2 / Z-Force series; Toro TimeCutter Z4202 / Z5020 / Z5060, Titan Z4800 / Z5200, GT2100 / GT2200 / GT2300, LX425 / LX468 / LX500 / SL500; New Holland G4030 / G4035 / G4050; selected Hustler models
  • Buyer search terms: Kohler 32-098-08 starter, 32-098-08-S starter motor, Courage Twin SV730 starter, Kohler KT735 starter, Cub Cadet LT1046 starter, Toro TimeCutter starter, 9 tooth 1.0 kW starter, commercial zero-turn mower replacement parts

Reference Specifications

  • System voltage: 12V DC, as stated in the product title.
  • Power: 1.0 kW, reported by compatible replacement listings cross-referenced to 32-098-08.
  • Pinion: 9 teeth (steel), reported by compatible replacement listings cross-referenced to 32-098-08.
  • Rotation: counterclockwise (CCW, viewed from the pinion / drive end; some overseas catalogs label the same rotation CW when viewed from the motor rear), reported by compatible replacement listings cross-referenced to 32-098-08.
  • Mounting and interfaces: two-hole flange with one 9.6 mm plain hole and one 9.9 x 10.8 mm slotted hole (allows fine adjustment of pinion-to-ring-gear clearance); pinion outer diameter 29.5 mm (1.161 in); overall length 202.9 mm (7.988 in); single B+ main power stud with case ground; PMDD permanent-magnet direct drive; net weight approx. 2.0-2.3 kg.
  • These pinion, rotation, power and mounting details are not confirmed Kohler factory specifications. Match them against the removed unit before ordering.

Fitment and Purchase Checks

Catalog-listed equipment: Kohler Courage Twin / 7000 Series engines and the Cub Cadet, Toro, New Holland and Hustler models listed above. Confirm the OE number, engine model and spec number, existing starter number, voltage, pinion tooth count (9), pinion outer diameter (29.5 mm), rotation, mounting hole pattern (plain hole plus slotted hole), overall length (202.9 mm), terminal layout and physical dimensions before purchase. Exact 32-098-08 length, width and height have not been verified and are omitted.

Critical identification: this is the tooth-count upgrade unit - the factory changed the early 10-tooth version (32-098-04-S and related numbers) to 9 teeth to raise cranking torque. Most catalogs show the old and new versions as directly replaceable, but some suppliers note a difference in flywheel ring-gear pitch, so verify the removed unit's tooth count and ring-gear condition before shipping. It is a completely different platform from the Kohler Command single-cylinder 12-098-05 (13 teeth) and 12-098-10 (10 teeth): this 1.0 kW, 9-tooth, 202.9 mm unit is only for Courage Twin / 7000 Series 20-27HP twins.

For Agricultural Buyers and Distributors

This listing is organized for commercial mower procurement teams, repair shops and parts distributors searching by equipment model and OEM reference. One SKU covers the SV / KT / ZT / EKT engine families and four equipment brands (Cub Cadet, Toro, New Holland, Hustler), making it a high-turnover, high-power unit for commercial zero-turn mowers. Standard supply terms listed for this reference: MOQ 50 pieces, lead time 15-30 days, 12-month warranty, ISO 9001 / IATF 16949 / CE certification. These are indicative values. For a quotation, specify the engine model, old-part number, required quantity and destination. Confirm price, stock, package quantity, warranty, certification documents and delivery terms with the seller before placing a purchase order.

Product Positioning

Kohler Courage Twin and 7000 Series engines sit in the busy middle of the commercial mower world - Cub Cadet RZT and XT riders, Toro TimeCutter and Titan decks, New Holland G-series utility tractors. These machines crank all day, every working day, and the starter is the part that gives out first. Kohler moved the platform from 10 teeth to 9 to raise cranking torque, so counters now carry two generations of numbers that describe one job. This listing puts the current 9-tooth 1.0 kW unit at the front and keeps the earlier 32-098-01-S / 03-S / 04-S numbers visible, so whoever holds an old number still finds the right part. For a distributor, that is one SKU answering four equipment brands and five engine families.

How It Works: Power and Engagement

The motor is a permanent-magnet direct-drive design. Current from the B+ stud spins a copper-wound armature between permanent magnets, and the 9-tooth steel gear rides out on a Bendix sleeve to meet the ring gear. Torque is what sets this unit apart from its single-cylinder cousins: 1.0 kW against the 0.6-0.7 kW singles, sized for the compression of a 725cc twin. The slotted mounting ear carries real weight in the field. Because it lets the installer trim the pinion-to-ring-gear clearance, a starter that once clattered on a worn flywheel can be set up to mesh cleanly - quieter engagement, less tooth wear, fewer comebacks. Rotation is counter-clockwise seen from the pinion end; some catalogs flip the label depending on the viewing end, but the physical rotation is the same.

Materials and Durability

  • Gear: 9-tooth hardened steel, chosen for the high shock loads of a large twin rather than the nylon gears used on small singles.
  • Windings: pure copper, keeping resistance low so the battery's first crank is as strong as the third.
  • Magnets: permanent ferrite field, stable under the heat soak that follows mowing on a July afternoon.
  • Brushes: wear-resistant carbon running in a sealed holder, away from grass dust.
  • Housing: sealed shell, approx. 2.3 kg, built for wash-down service and outdoor storage.

Problems It Solves

A Courage Twin in the shop usually tells one of four stories. Slow, labored cranking - magnets weakening or brushes worn thin inside the original. A metallic grind at start - gear no longer reaching full mesh. A whirring motor that never turns the engine - stripped gear or sheared Bendix. Or one click and silence - burned contacts or a dead solenoid circuit. A complete replacement unit ends all four without somebody rebuilding a tired motor. Two checks before the order goes out: count the teeth on the removed pinion (9 on this unit, 10 on the early version) and look at the ring-gear pitch if the flywheel is original to a pre-upgrade engine. The 13-tooth 12-098-05 and 10-tooth 12-098-10 Command singles are different platforms entirely and will not bolt on.

Replacement Value for Shops and Distributors

For repair shops the case is simple: correct part, same-day fit, no drilling or wiring work, and the slotted ear gives room to quiet a marginal mesh. For distributors the numbers carry the argument - MOQ 50, 7-30 days out the door, 12-month warranty, ISO 9001 / IATF 16949 / CE documentation on file, and pricing that leaves a real spread over OEM channels. With one stock line covering SV, KT, ZT and EKT engines across four equipment brands, this is the starter that turns on the shelf while specialty units wait.

Vehicle Fitment

BrandModelModel CodeYear
Cub CadetCub Cadet LTX1046LTX10462010–2015
KohlerKohler Courage SV740 (V-Twin 725cc 20-27 HP)Courage SV7402001–2015

Send Inquiry

To:
平台自营旗舰店
*Message:
Your Email: