Current Path:All Categories>Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046
Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046

Snow Plow Pump Motor for Boss Skidmore JS Barnes 12V 1.7kW CW Replaces HYD1563 W-8958 Lester 6046

Product Code:P20261108195539744
$80.00
10+

OEM Numbers

OEM Number

BossHYD1563
BossHYD001563
Aftermarket430-20023
AftermarketLPL0013
Aftermarket6046
Aftermarket6046N
Prestolite46-2432
Prestolite46-3564
Prestolite46-812
PrestoliteMDY6125S
PrestoliteMDY7030
PrestoliteMDY7058
WesternW-8958
AftermarketM-2600
AftermarketE-5622-1
Aftermarket82-6870
Prestolite160-718
Prestolite160-718A

Replacement Number

-

Factory Number

-

Technical Parameters

rated_voltage
12V
rotation_direction
CW
rated_power
1700W
Starter Type
PM motor, drive end bushing (ball-bearing version is a different unit)
installation_size
Field housing OD 114.3mm (4.5in), overall length 189mm (7.441in), 5/16-24 terminal post, 15.85mm slotted shaftmm
moq
10pcs
delivery_lead_time
7days
warranty_period
12months
certification
ISO 9001 / IATF 16949 / CE
stator_conductor_material
Pure copper winding
rotor_conductor_material
Pure copper winding
operating_environment
-20C to 40C

Product Overview

Controller says up. Blade stays down. You cycle it a few times, hear the pump whine, then nothing. On a Boss plow, that is usually the motor, not the pump.

This one bolts in its place. 12 volts, clockwise, and here is the headline: 1.7kW. That is 2.28 horsepower, a step up from the 1.2kW motors most plows run. Boss pumps work hard, lifting and angling a loaded blade hundreds of times a night, and the extra output shows up as snappy response when the oil is cold. Field housing is 114.3mm across, 4.5 inches, overall length 189mm. Shaft is a 15.85mm slotted end. Terminal post is 5/16-24.

Numbers it covers: HYD1563. HYD001563. Prestolite 46-2432, 46-3564, 46-812, MDY6125S, MDY7030, MDY7058. Lester 6046. WAI 6046N. Arrowhead LPL0013. Western W-8958. DB 430-20023. M-2600, E-5622-1, 82-6870, 160-718. Any of those on the label or in the parts book and this is your motor. Fits Boss plows across the board, plus Skidmore equipment and JS Barnes hydraulic power units.

Now the part that saves you a return. Boss used two versions of this motor. The one on this page has a bushing on the drive end. The other version runs a ball bearing there, and the two do not interchange. Look at the end of your old motor before you order. Bushing, you're in the right place. Ball bearing, this is not your part.

Swapping it is straightforward. Two bolts hold the motor to the pump. Move the coupler over, reconnect the cables to the 5/16-24 post, done. No splicing. No adapter plates. Cycle the controller and the blade should move like it did when the truck was new.

What you get: a brand new motor, copper windings, sealed housing against slush and salt. Built in an ISO 9001 and IATF 16949 certified plant, CE marked, twelve months of warranty. The OEM version runs $125 to $225 depending on who's selling it. This one leaves a good chunk of that in your pocket.

In the box: motor x1. Mounting bolts and coupler come off your original unit and get reused.

Vehicle Fitment

BrandModelModel CodeYear
BossSnow Plow Hydraulic Pump (All Models)Snow Plow Hydraulic Pump (All Models)2000–2023

Send Inquiry

To:
平台自营旗舰店
*Message:
Your Email: