Yamaha 115-225HP 2-Stroke Starter Motor 12V 9T CCW | Replaces 6K7-81800-10-00

Starter motor for the Yamaha 115, 130, 150, 175, 200 and 225HP two-strokes, and it takes the place of 6K7-81800-10-00. Nine teeth, counter-clockwise, 1.4kW, permanent magnet direct drive, so there is no field coil in there to burn out.

OE Reference Numbers

Primary reference: 6K7-81800-10-00

Substitute references: 6K7-81800-00-00, 6N7-81800-00-00 and 6N7-81800-10-00

Cross references reported by replacement part catalogs: Sierra 18-6415, ARCO 3428, Lester 18315, Lester 18315N, J&N 410-44082, Arrowhead SHI0088, API MOT5004N

Buyer search terms: Yamaha 150HP starter motor, 6K7-81800 starter, Yamaha 200HP 2-stroke starter

Reference Specifications

System voltage: 12V DC

Rated power: 1.4kW

Rotation: counter-clockwise (CCW)

Pinion: 9 teeth

Type: permanent magnet direct drive (PMDD)

Gear outside diameter: 28.6mm

Mounting: 2 holes, M8 thread, 88mm apart

Weight: 3.27kg

Teeth count, rotation and case length come from compatible catalogs and our own stock, not Yamaha drawings. Match them against the unit you are removing before ordering.

Fitment and Purchase Checks

Yamaha 115 to 225HP, and the span moves with the class: 115 and 150 run to 2010, 130 and 200 to 2004, 175 to 2000, 225 from 1990. All two-stroke. The four-stroke F40, F50 and F60 run a 67mm locating boss and a different starter, so this one will not go on them. Look at the boss on the old unit first.

Why This Unit

Slow crank, then one click. That is how these go. Brushes wear, magnets go weak, starter pulls more amps than the battery has. PMDD here, no field coil inside. Nine teeth, CCW, 28.6mm gear, 88mm bolt spacing. Mesh stays right.

For Buyers and Distributors

Six months warranty. 20 pieces minimum. Ships in 10-15 days, and RoHS, REACH and ISO9001 papers go with the order. Engine model, old number, quantity and port is all we need. Quote same day.

Aftermarket notice

This listing is an aftermarket replacement part supplied by StarterStock. We are not affiliated with, authorized by, or endorsed by any original equipment manufacturer. OE numbers, model names and brand names are quoted for identification and fitment matching only, and remain the property of their respective owners.