1 years
China
Carbon Brush Motor Brush Set 6.2×12×19mm Replace Part Power Tool Accessories
This is a motor carbon brush set with dimensions of 6.2×12×19 mm (length × width × height). As a replacement part, it belongs to the category of power tool accessories. It is suitable for brushed motors of various power tools and is a key consumable spare part that ensures the normal operation of the tool's motor.
Key Information Analysis:
Product Attribute: Carbon Brush Set / Motor Brush Set
It usually contains a pair (2 pieces) of carbon brushes, made by mixing and pressing graphite with metal powders such as copper and tin. It has excellent conductivity, wear resistance and high-temperature resistance. Through sliding contact with the motor commutator, it conducts current and drives the motor of the power tool to operate continuously and stably.
Product Attribute: Carbon Brush Set / Motor Brush Set
It usually contains a pair (2 pieces) of carbon brushes, made by mixing and pressing graphite with metal powders such as copper and tin. It has excellent conductivity, wear resistance and high-temperature resistance. Through sliding contact with the motor commutator, it conducts current and drives the motor of the power tool to operate continuously and stably.
Types of Adaptable Tools:
Based on the size specification of 6.2×12×19mm, it is mainly suitable for brushed motors of small and medium-sized power tools. Common applicable scenarios include:
Handheld power tools: such as light electric drills, sanders, trimmers, small angle grinders, etc.;
Portable equipment: some models of jigsaws, reciprocating saws, polishers, etc.
The core of adaptation is that the size of the carbon brush must completely match the brush holder of the tool's motor. Be sure to check the specifications and parameters of the original carbon brush before replacement.
Based on the size specification of 6.2×12×19mm, it is mainly suitable for brushed motors of small and medium-sized power tools. Common applicable scenarios include:
Handheld power tools: such as light electric drills, sanders, trimmers, small angle grinders, etc.;
Portable equipment: some models of jigsaws, reciprocating saws, polishers, etc.
The core of adaptation is that the size of the carbon brush must completely match the brush holder of the tool's motor. Be sure to check the specifications and parameters of the original carbon brush before replacement.
Size Specification: 6.2×12×19mm
This size is a core parameter to ensure adaptation, and the error should be controlled within 0.2-0.3mm. Otherwise, it will cause poor contact between the carbon brush and the commutator, leading to excessive sparks in the motor, abnormal operation noise, overheating and even damage to the tool. It is recommended to disassemble the tool's motor and accurately measure the size of the original carbon brush before replacement.
This size is a core parameter to ensure adaptation, and the error should be controlled within 0.2-0.3mm. Otherwise, it will cause poor contact between the carbon brush and the commutator, leading to excessive sparks in the motor, abnormal operation noise, overheating and even damage to the tool. It is recommended to disassemble the tool's motor and accurately measure the size of the original carbon brush before replacement.
Function and Role:
As the "current conduction bridge" of the power tool's motor, it transmits the current from the external power source to the rotating rotor, ensuring the normal start-up and operation of the tool;
By virtue of its own material properties, it reduces the friction loss of the commutator, and at the same time assists in motor heat dissipation, extending the service life of the tool.
As the "current conduction bridge" of the power tool's motor, it transmits the current from the external power source to the rotating rotor, ensuring the normal start-up and operation of the tool;
By virtue of its own material properties, it reduces the friction loss of the commutator, and at the same time assists in motor heat dissipation, extending the service life of the tool.
Replacement Signals:
The carbon brush should be replaced in time when the power tool shows the following situations:
The carbon brush is worn down to less than 1/3 of its original length (about 6-7mm);
There are significantly more sparks when the motor is running, and even accompanied by an abnormal burning smell;
The power of the tool decreases, it starts slowly or runs unstable.
The carbon brush should be replaced in time when the power tool shows the following situations:
The carbon brush is worn down to less than 1/3 of its original length (about 6-7mm);
There are significantly more sparks when the motor is running, and even accompanied by an abnormal burning smell;
The power of the tool decreases, it starts slowly or runs unstable.
In conclusion, this is a replacement carbon brush set for power tools with a size of 6.2×12×19 mm. It is widely applicable to brushed motors of small and medium-sized power tools and is an important accessory for maintaining the efficient and safe operation of the tools.