Johnson Evinrude 75-250HP Outboard Trim Tilt Motor 12V | Replaces 5005254 0438786

Trim and tilt motor for Johnson and Evinrude 75 to 250HP V4 and V6 outboards, an aftermarket replacement for 5005254, the current number that superseded 0438786 and 0439937. A 75.6mm case and a 104mm body, shorter than the Yamaha units.

OE Reference Numbers

Primary reference: 5005254

Substitute references: 0438786, 0439937

Cross references reported by replacement part catalogs: Sierra 18-6281, ARCO 6238, Arrowhead TRM0075, J&N 430-22023, Lester 10844N, API PT305NM, Mallory 9-18106, Quicksilver 8M6007540, EMP 4-6281, Protorque PH200-T004

Buyer search terms: Johnson trim motor, 0438786 tilt motor, Evinrude 150HP trim and tilt, OMC trim motor 5005254

Reference Specifications

System voltage: 12V DC

Rotation: reversible, up and down

Wiring: 2-wire with sealed spade terminals

Field housing: 75.6mm outside diameter

Overall length: 104mm

Shaft: 8mm with 2.5mm claw

Mounting: 4-bolt flange, 7mm holes

Weight: about 1.44kg

Sizes come from compatible catalogs and our own stock, not BRP drawings. Put the old motor next to this one before it goes on, because OMC changed trim motors across the years.

Fitment and Purchase Checks

Johnson and Evinrude 60 degree V4 and V6 from 75 to 250HP, 1998 and up. That covers the carbureted and the FICHT engines. E-TEC 115 to 300 from 2004 to 2018 uses the same unit. The older three-wire square motor from before 1998 is a different design and will not fit.

Why This Unit

These sit low and take spray every trip. Seal goes, water gets in, brushes stop, tilt drags then quits. Sealed case, copper windings, coated armature. Two-wire spade terminals plug straight into the OMC harness. Four bolts, and you are done.

For Buyers and Distributors

Six months warranty. 20 pieces minimum. Ships in 10 to 15 days. RoHS, REACH and ISO9001 papers on file. Tell us the engine model, the old number, the quantity and the port. Quote goes back same day.

Aftermarket notice

This listing is an aftermarket replacement part supplied by StarterStock. We are not affiliated with, authorized by, or endorsed by any original equipment manufacturer. OE numbers, model names and brand names are quoted for identification and fitment matching only, and remain the property of their respective owners.