Name: Yamaha 40-90HP Outboard Trim Tilt Motor 12V 2-Wire | Replaces 6H1-43880-02-00
Brand: Yamaha
SKU: TT-YM-6H1-02

Yamaha 40-90HP Outboard Trim Tilt Motor 12V 2-Wire | Replaces 6H1-43880-02-00

Product Code:TT-YM-6H1-02

Brand:Yamaha

$30.97

Core Advantages

● Performance | Materials & Craft --- 12V DC reversible trim motor with a 2-wire hookup, 64mm field housing, 119mm overall length, 8mm flat tang shaft and a 3-bolt flange on 6mm holes. Sealed case, copper windings, coated armature. On a boat that lives in salt water the shaft seal decides how long the motor lasts, not the brushes, because water gets past a tired seal long before the brushes are worn out. That is why the case is sealed on this one rather than vented like some of the cheap units you see on the market.
● Fitment | OE Numbers & Models --- Yamaha 40 50 60 70 75 80 85 90HP carbureted two-strokes 1992-2010, C and P prefix models included. The number on the old motor may read 6H1-43880-02-00 or 6H1-43880-01-00, and aftermarket catalogs file it under Sierra 18-6781, ARCO 6260, Lester 10830N, Arrowhead TRM0025 or J&N 430-22028. Two wires on this motor. If you find three wires under the cowling, you have the older 6H1-43880-00-00 unit with the bigger case, and this one will not sit on that flange.
● Installation | Easy, No Modification --- Three mounting holes on the same centres as the original flange, two wires that plug into the factory harness, and an 8mm flat tang shaft that mates with the pump coupler already on the engine. No relay box to add, nothing to drill, and no reason to open the trim pump itself.
● Warranty & Value --- 6 month warranty, MOQ 20pcs, 10-15 days lead time. RoHS / REACH / ISO9001 on file. Priced under a dealer trim unit, with salt water rated seals and a sealed case, so the part that fails first is the part we replaced.

OEM Numbers

OEM Number

Yamaha6H1-43880-02-00

Yamaha6H1-43880-01-00

Replacement Number

Sierra18-6781

ARCO6260

Lester10830N

ArrowheadTRM0025

J&N430-22028

APIPT602NM

Factory Number

Technical Parameters

rated_voltage

12V

ip_rating

ip54

salt_spray_resistance

480Hours

max_working_depth_m

moq

20pcs

delivery_lead_time

10-15days

warranty_period

6months

certification

RoHS/REACH/ISO9001

output_shaft_material

alloy_steel

cooling_method

natural_air

sacrificial_anode_config

stator_conductor_material

Pure copper winding

rotor_conductor_material

Pure copper winding

rotation_direction

CW, CCW

installation_size

Field housing OD 64, length 119mm

mounting_flange_size_mm

3 x 6mm

waterproof_terminal_spec

2-wire with sealed bullet terminals

Product Overview

Trim and tilt motor for Yamaha 40 to 90HP carbureted two-stroke outboards, an aftermarket replacement for 6H1-43880-02-00. Two wires, a 64mm field case and a 119mm body. If the old unit is full of salt water, this one goes straight on in its place.

OE Reference Numbers

Primary reference: 6H1-43880-02-00

Substitute references: 6H1-43880-01-00

Cross references reported by replacement part catalogs: Sierra 18-6781, ARCO 6260, Lester 10830N, Arrowhead TRM0025, J&N 430-22028, API PT602NM

Buyer search terms: Yamaha 40HP trim motor, 6H1-43880 tilt motor, Yamaha 90HP trim and tilt motor, Yamaha 2-stroke tilt motor

Reference Specifications

System voltage: 12V DC

Rotation: reversible, up and down

Wiring: 2-wire with sealed bullet terminals

Field housing: 64mm outside diameter

Overall length: 119mm

Shaft: 8mm with flat tang

Mounting: 3-bolt flange, 6mm holes

Weight: about 2.6kg

These figures come from compatible replacement listings and our own stock, not from Yamaha factory drawings. Measure the case on the motor you are replacing, because Yamaha used more than one trim motor across this horsepower range.

Fitment and Purchase Checks

Yamaha 40 to 90HP carbureted two-strokes, 1992 to 2010. C and P prefix models included. Not the F50 or F60 four-stroke. Not the later F75 or F90 either. Those are longer, with a different shaft. Two wires is this motor. Three wires is the older 6H1-43880-00-00. Bigger case, will not sit on this flange. Count the wires first.

Why This Unit

Water kills these motors, not work. Seal wears, salt gets in, armature rusts, brushes stop. Slow tilt, blown fuse, or it stops halfway and stays there. Those are the signs. Case is sealed, windings are copper, armature is coated. Salt water boats are what it is built for. Tilt working one way only? Check the motor first, relays after.

For Buyers and Distributors

Six months warranty. 20 pieces minimum. Ships in 10 to 15 days. RoHS, REACH and ISO9001 papers on file. Tell us the engine model, the old number, the quantity and the port. Quote goes back same day.

Aftermarket notice

This listing is an aftermarket replacement part supplied by StarterStock. We are not affiliated with, authorized by, or endorsed by any original equipment manufacturer. OE numbers, model names and brand names are quoted for identification and fitment matching only, and remain the property of their respective owners.

Vehicle Fitment

Brand	Model	Model Code	Year
Yamaha	Yamaha Outboard 90HP 2-Stroke	90-2S	1992–2010
Yamaha	Yamaha Outboard 85HP 2-Stroke	85-2S	1992–2010
Yamaha	Yamaha Outboard 80HP 2-Stroke	80-2S	1992–2010
Yamaha	Yamaha Outboard 75HP 2-Stroke	75-2S	1992–2010
Yamaha	Yamaha Outboard 70HP 2-Stroke	70-2S	1992–2010
Yamaha	Yamaha Outboard 60HP 2-Stroke	60-2S	1992–2010
Yamaha	Yamaha Outboard 50HP 2-Stroke	50-2S	1992–2010
Yamaha	Yamaha Outboard 40HP 2-Stroke	40-2S	1992–2010

Send Inquiry

To:

平台自营旗舰店

*Message:

Your Email: