1 years
China
Fits:
Arctic Cat Wildcat 1000 2014-2015, Wildcat 1000 Late build 2013, Wildcat 4 2013-2014, Wildcat 4 LTD 2014, Wildcat 4X 2014-2016, Wildcat 4X LTD 2014-2018, Wildcat GT 2013, Wildcat LTD 2013-2014, Wildcat LTD Late Build 2013, Wildcat Sport 2015-2016, Wildcat Sport LTD 2015-2018, Wildcat Sport SE 2017, Wildcat Sport XT 2015-2018, Wildcat Trail 2014-2018, Wildcat Trail LTD 2015-2018, Wildcat Trail SE 2016-2017, Wildcat Trail XT 2014-2018, Wildcat X 2013-2016, Wildcat X EPS 2018
Bearing Inner Diameter: 30mm, precision honed to match OEM driveshaft dimensions for a tight, slip-free fit without play Bearing Load Rating: 12.8 kN dynamic load rating, 8.2 kN static load rating, engineered to handle high-torque off-road acceleration and heavy cargo loads Included Kit Components: Heavy-duty sealed ball bearing, vibration-dampening rubber mounting isolator, zinc-plated mounting bolts, lock nuts, retaining snap rings, and dual debris shields Mount Hole Center Spacing: 92mm, aligned exactly to factory chassis mounting points for a 100% bolt-on, no-drill installation Seal Design: Double-lip nitrile rubber seals that block mud, standing water, trail dust, and rock debris to prevent premature bearing race wear Vibration Dampening Specification: 70A durometer rubber isolator that reduces drivetrain vibration transfer and cabin noise across all engine and driveshaft RPM ranges OEM Cross Reference Numbers: Direct drop-in replacement for Arctic Cat factory part numbers 1402-054 and 2402-149, requiring no fitment modifications Corrosion Resistance Finish: Zinc-plated steel bearing housing and mounting hardware to resist rust, oxidation, and corrosion from moisture, mud, and winter road salt treatments Operating Temperature Range: Rated for continuous use between -40°F and 350°F, suitable for extreme arctic cold, high-heat desert riding, and deep mudding environments Pre-Applied Lubrication: Factory packed with high-temperature EP2 lithium complex grease to eliminate initial greasing requirements at time of installation Maximum Rated Operating RPM: 8,000 RPM continuous rating, compatible with both stock and lightly modified high-output Wildcat drivetrain setups Average Installation Time: 1.5 to 2 hours with standard hand tools; no specialized press or puller tools are required for complete installation Product Warranty: 12-month limited warranty against manufacturing defects, covering free replacement of failed bearings or mounting components under normal recreational off-road use