Injector Throttle Body O-Ring Kit 725025 for Arctic Cat Z1 Turbo EXT/LXR/Sno-Pro (2010-2011)

Injector Throttle Body O-Ring Kit for Arctic Cat

Applications:
Arctic Cat Jaguar Z1 Turbo/Sno-Pro 2009, M 9000 Turbo All Models 2014 - 2018, M1100 Turbo All Models 2012 - 2013, TZ1 Turbo 2009 - 2013, XF 1100 Turbo LXR 2012 - 2013, XF 1100 Turbo Sno-Pro 2012 - 2013, XF 1100 Turbo Sno-Pro HC 2012, XF 1100 Turbo Sno-Pro LTD 2012 - 2013, XF 9000 Turbo All Models 2014 - 2016, Z1 Turbo 2011, Z1 Turbo EXT/LXR/Sno-Pro 2010, ZR 9000 Turbo 2014 - 2016

Manufacturer Part Number: 725025 Primary Construction Material: High-grade 70 Shore A durometer fuel-resistant nitrile rubber (NBR), formulated to resist hardening and cracking from prolonged fuel and heat exposure Kit Inclusions: Complete set of precision-sized O-rings required to seal all fuel injector and throttle body connection points, no additional seals needed for a full service OEM Cross Reference: Direct factory replacement for Arctic Cat OEM part numbers 3007-318, 0430-072, and 3006-728 Fuel Compatibility: Safe for use with standard unleaded gasoline, oxygenated race fuels, and ethanol-blended fuels up to E85 Operating Temperature Range: Rated for continuous service from -40°F (-40°C) to 250°F (121°C) to withstand extreme winter riding temperatures and high turbocharger under-hood heat Pressure Seal Rating: Engineered to maintain a leak-free seal against up to 30 PSI of intake boost pressure, suitable for both stock and modified turbo setups Fitment Type: 100% direct fit component, requiring no custom cutting, trimming, or modification to install on listed snowmobile models Performance Design: Molded to exact OEM dimensional tolerances to eliminate vacuum leaks, boost leaks, fuel seepage, rough idle, and inconsistent throttle response caused by worn, hardened original seals Installation Recommendation: Lubricate O-rings with clean engine oil or dielectric silicone grease during assembly to prevent pinching, tearing, or misalignment during installation Warranty Coverage: 1-year limited warranty against manufacturing defects and premature seal failure when installed per official Arctic Cat factory service guidelines Chemical Resistance: Resistant to degradation from engine oil, intake tract carbon buildup, fuel system additives, and light coolant residue exposure Seal Compression Set Rating: Less than 10% permanent compression set after 1000 hours of rated operating conditions to maintain consistent sealing pressure over long service life