1 years
China
Verify the part fits before purchasing
Drive Shaft Kit Lower-Track for Yamaha
Applications:
Polaris 700 XC SP 2003
Yamaha Apex Mountian EFI 2006, Apex Mountian/SE EFI 2007, Apex RTX/ER EFI 2006, Apex RXT/ER EFI 2007, Mountain Max 600 1997 - 2002, Mountain Max 700 1997 - 2003, Mountain SRX 700 1998, Nytro 2006 - 2007, Nytro ER 2006 - 2007, Phazer 500 1999 - 2009, Phazer FX 500 2007, Phazer GT 500 2007 - 2013, Phazer Mountain Lite 2000 - 2007, Phazer MTX 500 2008 - 2017, Phazer RTX 500 2008 - 2017, Phazer XTX 500 2014 - 2018, Rage 2006 - 2007, Rage GT 2007, RS Rage 2005, RS Vector 2005 - 2008, RS Vector ER 2005 - 2006, RS Vector ER/GT 2007, RS Vector GT 2006 - 2008, RS Vector LTX 2008 - 2009, RS Vector LTX GT 2008 - 2009, RS Vector Mountian 2006 - 2007, RS Vector Mountian 900 2005, RS Vector Mountian SE 2006, RS Vector Mountian/SE 2007, RS Vector/ER/GT 2007, RS Venture 2005 - 2018, RS Venture GT 2007 - 2008, RS Venture GT EFI 2009, RS Viking Professional 2006, RX-1 2003 - 2005, RX-1 Mountian/LE 2003 - 2005, SRX 600 1998 - 1999, SRX700 1998 - 2002, SX Venom 600 2004 - 2006, SX Venom ER 600 2004 - 2006, SX Viper 700 2002 - 2003, SX Viper ER 700 2003 - 2004, SX Viper Mountian 700 2003 - 2006, SX Viper S 700 2004, SX500R 2000 - 2001, SX600R Venom/ER 2000 - 2003, SX700R 2001, SX700SD 2000, V Max 500 1999 - 2001, V Max 500 Deluxe 1999 - 2001, V Max 500 SX 1999, V Max 500 XT 1997 - 1998, V Max 500 XTC 1997 - 1998, V Max 500 XTC Deluxe 1998, V Max 500 XTC W/REV 1997, V Max 500 XTR 1998, V Max 600 1999, V Max 600 Deluxe 2000 - 2001, V Max 600 Deluxe Elec Start 1999, V Max 600 ER 2002, V Max 600 SX 1997 - 1999, V Max 600 SXS 1998, V Max 600 XT 1997 - 1998, V Max 600 XTC 1997 - 1998, V Max 600 XTC Deluxe 1998, V Max 600 XTC W/REV 1997, V Max 600 XTR 1998, V Max 600ER 2003, V Max 700 1999 - 2001, V Max 700 Deluxe 1999 - 2001, V Max 700 SX 1997 - 1999, V Max 700 XT 1998, V Max 700 XTC 1998, V Max 700ER 2002, Venture 500 1997 - 1998
Material Forged 4140 Chromoly Alloy Steel Surface Finish Black Phosphate Corrosion Resistant Coating Main Shaft Outer Diameter 30mm (1.18 in) Input Spline Count 21 Teeth, 30 Degree Pressure Angle Output Spline Count 24 Teeth, Matches OEM Track Drive Sprocket Specifications Maximum Torque Rating 450 ft-lbs, Compatible with Stock and Moderately Modified Engines Kit Contents 1x Lower Drive Shaft, 2x Pre-Pressed Sealed Bearings, 1x Retaining Clip Set, 4x Installation Shims OEM Part Cross Reference Yamaha 8CR-47411-00-00, 8CR-47411-01-00, 8ES-47411-00-00 Product Net Weight 5.2 lbs (2.36 kg) Compatible Track Width 15 inch Standard Production Snowmobile Tracks Installation Difficulty Level Moderate, Requires Standard Mechanical Toolkit and 2-3 Hours of Installation Time Warranty Period 12 Month Limited Manufacturer Warranty Against Defects in Materials and Workmanship