Maximum continuous current: 120A (at 23°C), 100A (at 85°C)
Capable of interrupting 120A current
Dual-group contacts in parallel configuration reduce contact voltage drop
Plastic-encapsulated design achieves IP6K7 protection rating in initial state
Coil holding voltage applied to entire unit reduces power loss
Meets IEC 61000-4-5:2017 surge current requirement of 5000A (8/20μs)
Suitable for wave soldering conditions
1. Coil voltage type: DC
2. Coil operating voltage: 24V
3. Contact configuration: One set normally open
4. Number of contacts: Single contact
5. Lead type: PCB-mount
6. Mounting type: PCB mounting
7. Package type: Plastic-encapsulated
8. Lead structure: Standard pin width, short leads (2.25mm)
9. Coil power rating: Standard
10. Coil characteristic: Monostable
11. Contact material: AgSnO₂
12. Packaging: Blister pack
13. Load voltage: 12V
14. Rated Coil Power: Approx. 1.5W
15. Dielectric Withstand Voltage: 600VAC 1min
16. Operating Time: ≤15ms
17. Release Time: ≤7ms
18. Creepage Distance: 6mm
19. Clearance Distance: 0.45mm
20. Insulation Resistance: 100MΩ
21. Maximum rated switching current (DC): 120
22. Maximum switching voltage (DC): 14
23. Temperature range: -40°C to 85°C
24. Mechanical endurance: 10,000,000 cycles
25. Electrical endurance: 100,000 cycles
26. Contact Gap: 0.45mm
27. Application Fields: Power Management Systems, Rear Window Defoggers, Battery Disconnect Devices, Automotive Air Conditioning, Fog Light/Headlight Control, Fuel Pump Control, Anti-lock Braking Systems (ABS), Traction Control Systems, Cooling Fan Control
28. Weight: Approx. 35g
29. Volume: 17161mm³
120A Automotive Anti-lock Braking Relay HFV7-GP/12-24-HST
US$ 9.57 / 1 Piece
1Piece Minimum order
Type:
Relay
Category:
Automotive
Brand:
Xiaoxibian
About this item
- This 120A HFV7-GP/12-24-HST anti-lock braking relay is a direct drop-in replacement for all 12V and 24V passenger vehicles, light trucks, and SUVs that specify this exact ABS relay form factor.
- Built with high-conductivity copper contacts and a flame-retardant impact-resistant plastic housing, this ABS relay delivers reliable 120A performance even under harsh under-hood vibration, temperature swings, and moisture exposure.
- This anti-lock braking relay is a brand new, factory-calibrated OEM-equivalent part that meets or exceeds all original manufacturer performance standards with no prior use or cosmetic defects.
- Engineered to regulate consistent power supply to your vehicle’s anti-lock braking system, this 120A relay prevents unexpected ABS fault codes, maintains stable braking on slippery roads, and reduces skid risk during emergency stops.
- Each HFV7-GP/12-24-HST ABS relay ships individually sealed in anti-static protective packaging, with a printed quick-install guide and compatibility check card included for hassle-free setup.
Jinhua Xiaoxibian Technology Co., Ltd
1 years
China
Avg Response Time: ≤24 h
Business Type: ATV start motor
Chat
Products related to this item
Latest Products from this Supplier
Contact Supplier
Jinhua Xiaoxibian Technology Co., Ltd
| Address | 5th Floor, Building 6, No. 399, Shicheng Street, Qiubin Street, Wucheng District, Jinhua City, Zhejiang Province, China | ||||
|---|---|---|---|---|---|
| Homepage Address | https://www.starterstock.com/shop/xiaoxibian/ | ||||
| Other Homepage Address | |||||